Pet Cleanup Kit contents: foaming liquid, absorbent powder, brush, gloves and UV light

Pets and Indoor Air: How to Clean HVAC Filters, Vents and Air Purifiers

Pet hair and dander don’t stay on the floor. They float, settle on vents, get pulled into your heating and cooling system, and clog the filter in an air purifier. A clogged filter cleans less air and can make the whole house smell of dog or cat. This guide covers how to keep HVAC filters, vents and air purifier filters working in a home with pets.

The advice here follows the US Environmental Protection Agency (EPA), whose pages are public domain, so quoted lines are marked. For your own system, the maker’s manual comes first: filter sizes, cleaning methods and schedules differ between models.

Start with the source

A filter only catches what is in the air. The EPA puts it plainly: “The most effective ways to improve your indoor air are to reduce or remove the sources of pollutants and to ventilate with clean outdoor air.” With pets, the source is hair and dander on beds, sofas and floors. Brushing your pet often, washing its bedding and vacuuming do more than any filter. Filters and purifiers then catch what is left.

Pet hair floating in the air

If you can see cat or dog hair drifting in a sunbeam, most of it is coming off the pet and the soft furnishings faster than it settles. Cut it at the source first, then catch the rest.

  1. Brush outside or in one easy-to-clean room. A few minutes of brushing every day in shedding season takes out the loose undercoat before it ends up in the air. Our deshedding guide covers the tools.
  2. Pick hair up damp, not dry. A feather duster or a dry cloth just sends hair back into the air. Use a slightly damp microfiber cloth or a rubber glove on shelves and sills, and a damp rubber broom on hard floors.
  3. Vacuum with a sealed HEPA vacuum and empty it outside. A vacuum with a full bin or a clogged filter blows fine hair out of the exhaust; see cleaning a vacuum after pet hair.
  4. Wash the hair magnets. Pet beds, throws and cushion covers shed hair back into the room every time someone sits down. Wash them weekly in shedding season.
  5. Run a purifier near the pet’s favorite spot and keep its pre-filter clean, and change the HVAC filter more often while the pet is shedding (see below).
  6. Watch the humidity. In our experience hair floats and clings more in very dry winter air, because of static. A humidifier set to a comfortable level, around 40 to 50 percent, can help.

If someone in the home reacts to the hair, the room by room routine in our pet allergy cleaning guide goes further.

HVAC and furnace filters

If your home has forced-air heating or cooling, the filter in the return vent or furnace is your biggest air filter. Pet hair loads it quickly.

  • Pick the right rating. The EPA says to “choose a filter rated at least MERV 13 or as high as your system will accommodate.” Check your system’s manual before going higher, since a very dense filter can restrict airflow in some systems.
  • Change it on time. The EPA notes that “all filters need regular replacement. If a filter is dirty and overloaded, it won’t work well.” Follow the filter maker’s schedule. In our view, homes with pets should check the filter every month, because hair builds up faster, and change it whenever it looks grey or matted.
  • Write the date on the frame when you put a new one in, so you know how long it has been.
  • Fit it the right way round. Most filters have an arrow showing the airflow direction. It should point toward the furnace or air handler.
  • Turn the system off before you swap the filter, and vacuum around the filter slot while it is open.
  • Washable filters: if your system uses one, follow the maker’s cleaning steps and let it dry fully before you put it back. A damp filter can grow mold.

If the smell seems to come from a damp basement, see how to find and clean pet urine smell in a basement.

Vents and return grilles

Hair and dust collect on the grilles, especially low ones near where pets lie. In our view a monthly clean keeps them from feeding hair back into the room:

  1. Turn the system off.
  2. Vacuum the grille with a brush attachment.
  3. For a deeper clean, unscrew the cover, wash it in warm water with a little dish soap, rinse and dry it fully before you put it back.
  4. Vacuum as far into the duct opening as you can reach.
  5. Keep pet beds and litter boxes away from return vents, so the system doesn’t pull hair and litter dust straight in.

Deep duct cleaning is a job for a professional. It isn’t needed often. In our view, consider it if you see heavy dust or hair blowing out of the vents, or after a long-term pet hair or odor problem.

If your pet peed into a floor vent, see pet peed in a floor air vent: how to clean the register and duct.

Portable air purifiers

A portable air cleaner helps in the rooms where you and your pet spend the most time. The EPA’s advice:

  • Size it to the room. “Choose a portable air cleaner that has a clean air delivery rate (CADR) that is large enough for the size of the room or area in which you will use it.”
  • HEPA is the usual choice. The EPA notes that portable cleaners “often achieve a high CADR by using a high-efficiency particulate air (HEPA) filter.”
  • Place it well. Put it in the rooms you use most and “make sure the airflow is not obstructed.” In our view, keep it out of reach of pets that chew cords or sleep against the intake.
  • Run it longer. The EPA says “higher fan speeds and longer run times will increase the amount of air filtered.”
  • Avoid ozone. The EPA warns: “Avoid portable air cleaners and furnace/HVAC filters that intentionally produce ozone. Ozone is a lung irritant.” That applies to your pets’ lungs as well as yours.

Cleaning an air purifier

Pet hair clogs the pre-filter long before the main filter is used up. Check your model’s manual, but most work like this:

  1. Unplug the purifier.
  2. Wipe the outside and the intake grille with a dry or slightly damp cloth.
  3. Take out the pre-filter, the coarse mesh layer in front. Vacuum it or rinse it, if the manual says it is washable. In our view, every two to four weeks suits most pet homes. Let it dry fully before you put it back.
  4. Don’t wash or vacuum a HEPA filter unless the manual says you can. Most are replaced, not cleaned.
  5. Replace the HEPA and carbon filters on the maker’s schedule, or sooner if the filter indicator comes on or the unit starts to smell.

If someone in the home has allergies or asthma

The EPA lists pet dander as an asthma trigger and suggests, among other steps, to “keep it out of the bedroom of the person with asthma,” to “keep pets off of your furniture,” to “use an air cleaner with a HEPA filter” and to “vacuum carpets and furniture when the person with asthma is not around.” For allergies and asthma, follow your doctor’s advice.

For a full room-by-room routine, see pet allergies at home: a cleaning routine to reduce dander.

A simple schedule

  • Weekly: vacuum floors and furniture, wash the pet’s bedding, wipe the purifier intake.
  • Monthly: check the HVAC filter, vacuum vents and returns, clean the purifier pre-filter.
  • As the maker says: replace HVAC filters and purifier HEPA and carbon filters.

For the vacuum itself, see our guide to cleaning a vacuum after pet hair. For smells that remain after the filters are clean, see how to get rid of dog smell in the house.

Keep cleanup supplies ready

A clean filter won’t remove smells from a urine spot on the carpet. For those, our Professional Pet Stain & Odor Cleaning Kit treats the stain and odor at the source.

Frequently asked questions

How often should I change my HVAC filter with pets?

Follow the filter maker’s schedule as a maximum. With pets, check it monthly and change it when it looks dirty. The EPA notes a dirty, overloaded filter won’t work well.

Does an air purifier help with pet smell?

It can help with hair and dander in the air, and models with a carbon filter can reduce some smells. But the EPA says removing the source is the most effective step. Wash bedding and clean any urine spots first.

Can I wash a HEPA filter?

Only if the manual says it is washable. Most HEPA filters are designed to be replaced. Washing a non-washable one can damage it.

Are ionizers or ozone air purifiers safe with pets?

The EPA advises avoiding air cleaners that intentionally produce ozone, because ozone is a lung irritant. Choose a filter-based purifier instead.

Do air purifiers pick up pet hair?

Only a little. Most shed hair is heavy enough to fall to the floor before it reaches the purifier, so you still need to vacuum. What a HEPA purifier does catch well is the fine dander and dust that floats in the air. Loose hair that does get pulled in mostly ends up on the pre-filter, which is why that layer needs the most attention in a home with pets.

How do I get rid of cat hair floating in the air?

Brush the cat every day in shedding season, away from the living room, dust with a damp cloth instead of a duster, vacuum with a sealed HEPA vacuum and wash its bed and throws weekly. A HEPA purifier with a clean pre-filter near the cat’s favorite spot catches some of what is left, and the steps in pet hair floating in the air work for dogs too.

How often should I change the air purifier filter with pets?

Follow the maker’s schedule as a starting point. In our view a home with a shedding dog or cat usually needs the pre-filter cleaned every two to four weeks and the HEPA and carbon filters replaced at the short end of the maker’s range, or sooner if the filter indicator comes on, airflow drops or the unit starts to smell of pet. Write the date on the filter frame when you fit it so you know how long it has been in.

Further reading

This guide is general cleaning information. Follow the manual for your heating and cooling system and your air purifier, and talk to your doctor about allergies or asthma.

Spick'n Span Flyer

Sign up to get 10% off your entire order and be first to know about our product launches, exclusive promos, and more...