Pet Cleanup Kit contents: foaming liquid, absorbent powder, brush, gloves and UV light

Pet Urine on Marble and Natural Stone Floors: How to Clean It

Marble, travertine, limestone, slate and granite floors look tough, but they do not react to pet urine the way tile does. Most natural stone is porous, so urine can soak in and leave a dark stain or a smell that keeps coming back. Marble, travertine and limestone are also sensitive to acid, so the vinegar trick that people use on other floors can leave dull, rough marks on them. This guide covers how to clean a fresh or old accident on stone without damaging it, and how to tell a stain from an etch mark.

The steps here are our own view, based on general stone care and pet urine cleanup. Stone types and finishes vary a lot, so check your installer’s or the stone maker’s care advice and test any product on a hidden spot first. For glazed ceramic or porcelain tile, see pet urine and vomit on tile and grout instead.

The short version

  • Blot fast. The longer urine sits on stone, the deeper it soaks in.
  • No vinegar, lemon or other acids on marble, travertine, limestone or onyx. They etch the surface.
  • No bleach or ammonia. Bleach can mark some stones, and ammonia smells like urine to a pet.
  • Use a pH-neutral cleaner made for stone, or a pet enzyme cleaner whose label says it is safe for natural stone.
  • Dark spot = stain, dull spot = etch. A stain may lift with a poultice. An etch needs polishing.
  • Keep the stone sealed. Sealer slows down how fast urine soaks in.

Which stones are most at risk

  • Marble, travertine, limestone and onyx are calcium-based, so acids etch them. They are also porous, especially travertine with its small holes and honed (matte) finishes.
  • Granite and slate stand up better to acid, but they can still absorb urine and stain, especially if the sealer has worn off.
  • Grout lines between stone tiles soak up urine easily and are often where the smell sits.

How to clean fresh pet urine on a stone floor

  1. Blot, do not wipe. Press paper towels or an old towel onto the puddle to soak up as much as you can. Wiping spreads it over more stone and into the grout.
  2. Rinse with plain water. Pour a little clean water over the spot and blot again. Repeat once or twice to dilute what is left.
  3. Clean with a stone-safe product. Use a pH-neutral stone cleaner, or a pet enzyme cleaner if its label says it is safe for natural stone. Test it on a hidden spot first, then follow the label for how long to leave it.
  4. Rinse and dry. Wipe with a cloth dampened in clean water, then dry the area fully with a soft towel. Water left standing on some stones can leave marks.
  5. Check the grout. If the smell stays, the grout probably soaked some up. Work the cleaner into the grout line with a soft brush, then rinse and dry.

How to deal with old stains and smells

Old urine on unsealed or worn stone often shows up as a dark or yellowish patch, and the smell comes back on humid days. Find every spot first with a UV light, see how to find pet urine with a black light. Then:

  1. Clean the surface as above, so nothing is left on top.
  2. Try a stone poultice. A poultice is a paste you spread over the stain and cover, so that as it dries it draws the stain up out of the stone. Buy one made for natural stone and follow its label for mixing, how long to leave it and how to remove it. It may take more than one go.
  3. Treat the smell. Once the stain has lifted, a stone-safe pet enzyme cleaner can help break down what is left in the stone and grout.
  4. Reseal when it is clean and fully dry, with a sealer meant for your stone, following its label.

If the stain or smell is deep, or the floor is valuable, in our view it is worth calling a stone restoration professional rather than trying stronger products.

Stain or etch mark?

  • A stain is darker or yellow and sits inside the stone. Cleaning or a poultice may lift it.
  • An etch mark is a dull, lighter or rough patch on polished marble, travertine or limestone, where acid has eaten into the surface. Cleaning will not fix it. A light etch can sometimes be buffed out with a marble polishing powder made for the job, following its label. A deeper one needs a stone professional to hone and repolish it.

What not to use on stone

  • Vinegar, lemon juice and acidic cleaners (including many bathroom and limescale cleaners): they etch calcium-based stone.
  • Bleach: can discolor some stones, and never mix it with other cleaners.
  • Ammonia-based cleaners: the smell can draw your pet back to the same spot.
  • Abrasive powders and scouring pads: they scratch polished stone.
  • Too much hydrogen peroxide or baking soda paste without checking: they can lighten or dull some stones. Use them only if the stone maker or a stone professional says so.

For a broader look at home remedies, see vinegar, baking soda or enzyme cleaner for pet urine.

How to protect a stone floor

  • Check the sealer. Drip a little water on the stone. If it darkens the stone within a few minutes, the sealer has worn and it is time to reseal.
  • Use washable rugs or mats in the spots your pet uses, with a pad that does not trap moisture against the stone, see washable rugs and rug pads.
  • Clean up quickly and keep a stone-safe cleaner where you can reach it.
  • Find out why it happens. A pet that keeps going indoors may need more trips outside or a vet check. See potty training basics or senior pet incontinence.

Cat or dog peed in the fireplace or on brick

Brick, mortar and the ash in a firebox soak up urine fast, and the smell gets stronger when the fire next warms them. Clean it before you light another fire.

  1. Make it safe first. Wait until the fireplace is completely cold. For a gas fireplace, turn it off at the switch or valve and let it cool. Do not spray cleaners on gas logs, the burner or the ember bed; if they got wet, ask a gas fireplace technician to check them.
  2. Take out the wet ash. Scoop the ash and any soaked wood into a metal bucket with gloves on. Ash that cats use as litter will smell until it is gone.
  3. Blot the brick or hearth. Press paper towels onto the spot to lift what you can. Do not scrub it in yet.
  4. Soak with an enzyme cleaner. Use a pet enzyme cleaner that the label says is safe for masonry or stone, and use enough to reach as deep as the urine went. Leave it as long as the label says, then work it into the mortar lines with a soft brush.
  5. Rinse lightly and let it dry fully. Brick can take a day or more to dry. If the smell is still there once it is dry, repeat the enzyme step.
  6. Seal the hearth if it is porous. A clean, dry brick or stone hearth can be sealed with a masonry sealer that suits it, following the label. Do not seal the inside of the firebox unless the product says it is made for that.

Skip acids such as vinegar or brick cleaners made with acid on a marble, limestone or travertine hearth, and never mix bleach with other cleaners. Cats often use a fireplace because the ash feels like litter, so keep the screen or doors closed and see how to stop a cat peeing in the same spot. For dogs, see potty training basics.

Frequently asked questions

Can I use vinegar to clean dog pee off marble?

No. Vinegar is an acid and it can etch marble, travertine and limestone, leaving dull marks that cleaning will not remove. Use a pH-neutral stone cleaner or a pet enzyme cleaner that is labeled safe for natural stone.

Why is there a dark spot on my marble floor where the dog peed?

The urine has soaked into the stone, usually because the sealer has worn or the spot was left too long. Clean the surface, then try a stone poultice to draw it out, and reseal once it is clean and dry. A dull, lighter spot is more likely an etch mark, which needs polishing instead.

Does pet urine damage granite?

Granite resists acid better than marble, but unsealed or worn granite can still soak up urine and stain. Blot fast, clean with a stone-safe product, and keep it sealed.

The floor is clean but it still smells. What now?

The smell is usually in the grout or deeper in porous stone. Treat the grout with a stone-safe enzyme cleaner and a soft brush, let it work as the label says, then rinse and dry. If it still smells, a stone or grout professional can check whether the grout needs replacing.

Why is my cat peeing in the fireplace?

Soft ash and soot feel like litter to many cats, and a fireplace is a quiet corner. Clean out the ash and the urine, close the screen or doors, and check that the litter box is clean and easy to reach. If your cat is peeing outside the box in several places, have a vet check it.

Keep supplies ready

A UV light, gloves and absorbent towels help you find and lift a spot before it soaks into the stone. Our Pet Cleanup Kit includes a black light and an absorbent powder. Check each product’s label to confirm it suits natural stone, and test it on a hidden spot first.

This guide is general cleaning information. Follow your stone maker’s or installer’s care advice and the product label. For questions about your pet’s health or toilet habits, talk to your veterinarian.

Spick'n Span Flyer

Sign up to get 10% off your entire order and be first to know about our product launches, exclusive promos, and more...