Pet Urine in the Subfloor: How to Clean, Dry and Seal It
When a pet uses the same spot again and again, urine does not stop at the carpet. It runs through the backing into the pad, and from there into the subfloor: the plywood, chipboard or concrete under everything. Once it is there, cleaning the carpet will not fix the smell, and new carpet laid on top can start to smell too. This guide covers how to tell whether urine has reached the subfloor, and how to clean, dry and seal it.
The point about replacing carpet and pad is paraphrased from Humane World for Animals. Everything else is our own view. Follow the instructions on every product you use, and ask a flooring professional if you are not sure what your floor is made of or whether it is sound.
Signs urine has reached the subfloor
- The smell comes back days after you clean the carpet, especially on warm or humid days.
- The smell is strongest close to the floor, or along a wall.
- A black light shows a large spot, or many overlapping spots, in one area.
- The carpet pad under the spot is stained, hard or crumbly when you lift a corner.
- The floor feels soft, or boards creak where they did not before.
Before you start
- Find every spot with a black light in a dark room, and mark them. See old and dried pet urine stains in carpet.
- Renting? Talk to your landlord before you lift or replace anything. See pet stains and smells when you move out.
- Protect yourself: gloves, old clothes, and a dust mask when you cut or remove old pad. Keep the room ventilated, and keep pets and children out.
Lift the carpet and remove the pad
Humane World for Animals notes that if urine has soaked into the pad, you may need to replace that section of carpet and pad. In our view:
- Pull the carpet back from the nearest wall (a carpet fitter can do this without damaging it).
- Cut out the stained pad, with a margin of clean pad around it, and bag it.
- If the carpet backing is heavily stained, it may need replacing too. Clean carpet backing from both sides if you keep it.
Cleaning a wooden subfloor (plywood, OSB, chipboard)
- Look at it in good light, and use a black light. Urine usually shows as a darker stain.
- Clean the stain with a pet stain and odor cleaner that is suitable for wood, following the label. Apply only as much as needed to reach the stained wood. Do not flood it: wood swells, and liquid can run into joists and under walls.
- Let it work for the full time on the label, then blot up any excess.
- Dry it thoroughly. Use fans and open windows. Give it at least a day or two; a moisture meter, if you have one, tells you when the wood is dry.
- Check the smell again once dry. Repeat if needed.
- Seal it (see below) before new pad and carpet go down.
If the wood is soft, swollen, crumbling or delaminating, cleaning is not enough. That section should be cut out and replaced by someone who knows how; a soft subfloor can be a safety issue.
Cleaning a concrete subfloor
Concrete is porous and soaks up urine. Clean it with a pet stain and odor cleaner suitable for concrete, following the label, and scrub with a stiff brush. Let it dry fully, which can take a few days on a slab. For basement floors, see basement pet urine smell, and for outdoor concrete, dog pee on concrete and artificial turf.
Sealing the subfloor
In our view, once a wooden or concrete subfloor is clean and completely dry, a stain-blocking, odor-sealing primer is the best way to lock in anything that is left. Choose one made to seal odors on that surface, follow the maker’s instructions on ventilation and coats, and let it cure fully before new pad goes down. Sealing does not replace cleaning: sealing over wet or dirty wood can trap the problem.
Tack strips and baseboards
Wooden tack strips near the wall often soak up urine too. If they are stained or smell, replace them. Check the bottom of the drywall and baseboard near the spot; see cat spraying: cleaning walls and furniture.
What not to do
- Do not lay new carpet on an untreated subfloor. The smell can come up through it.
- Do not use bleach or ammonia on the subfloor, and never mix cleaners.
- Do not soak the wood with water or cleaner.
- Do not seal damp wood.
- Do not ignore soft spots. Get them checked.
Stop it happening again
A repeat spot needs two things: a fully clean floor, and a reason for your pet to go elsewhere. See your vet if an adult pet has started having accidents, then look at the litter box or toilet routine. For more, see how to get pet urine smell out of carpet.
Keep cleanup supplies ready
Catching accidents early is the best way to keep urine out of the subfloor. Our pet stain and odor cleaning kit puts gloves, a stain and odor cleaner, an absorbent powder, a brush and a black light together.
Frequently asked questions
Can I fix subfloor urine smell without lifting the carpet?
Rarely, if urine has reached the subfloor. Products put on top of the carpet seldom reach that deep without soaking everything. Lifting the carpet is usually the only full fix.
Do I have to replace the subfloor?
Usually not. Clean, dry and seal it. Replace only sections that are soft, swollen or crumbling.
How long should the subfloor dry before sealing?
Until it is completely dry, often a day or two for wood with good airflow, longer for concrete. Follow the primer maker’s guidance on moisture.
Will new carpet pad stop the smell?
Not on its own. Clean and seal the subfloor first, then lay new pad.
Will a primer like KILZ seal pet urine smell in the subfloor?
An odor-sealing primer can lock in what is left, but only after the subfloor is cleaned and completely dry. Several brands, KILZ among them, sell primers labeled for sealing odors. Check that the label says it seals odors and suits your surface (wood or concrete), cover the whole stained area plus a margin around it, apply the coats the maker recommends, ventilate the room and let it cure before new pad goes down. Primer over wet or still-dirty wood can trap the smell instead of stopping it.
What if the urine went under laminate or vinyl plank flooring?
Then the subfloor job is the same once the boards are up. Floating click-lock floors can often be lifted board by board from the nearest wall; ask your installer if you are not sure. Throw away soaked foam underlayment, clean, dry and seal the subfloor as above, then replace any boards that have swollen. For the surface side, see pet urine on laminate and vinyl plank floors.
Further reading
This guide is general information. It does not replace advice from a flooring professional or your veterinarian.